Home Products BIOHYD OPTI (HEPR) ARCTIC

BIOHYD OPTI (HEPR) ARCTIC

LUBECO^TMBIOHYD OPTI 26 ARCTIC is a high-performance, renewable hydrocarbon-based (PAO) environmentally acceptable hydraulic fluid (EALs). Arctic range is specially designed for work in extreme cold conditions all year long.

BIOHYD OPTI 26 ARCTIC provides a very high level of thermo-oxidative and hydrolytic stability at both high and extremely low operating temperatures. Its modern, zinc-free and ash-free additive technology guarantees maximum lubrication reliability, shear stability and corrosion protection.

BIOHYD OPTI 26 ARCTIC features a low foaming tendency, and good water and air release characteristics, as well as compatibility with seal materials.

BIOHYD OPTI 26 ARCTIC is a readily biodegradable product for reduced environmental footprint.

Industry Performance Standards

DIN 51524-3 HVLP
ISO 6743-4 HEPR
AFNOR NF E 48-603 (HL);
Cincinnati-Milacron P-38 (HL-32), P-55 (HL-46), P-54 (HL-68), P-57 (HL-150), P-62 (FC-10)
DIN 51515, p.1(L-TD), p.2(L-TG); Siemens TLV 9013 04;
BS 489 ; GEK 32568 A/C ; MIL-L-17672 D; CEGB 207001
Brown Boveri HTGD 90117 ; Alstom HTGD 90 117 V0001 S
U.S.Steel 120; Westinghouse Electric Corp. Spec.
FZG (DIN 51354, part 2)
Vickers vane pump test (Type V 104-C, DIN 51389, part 2)
Siemens TLV 9013 04
Environmentally Acceptable Lubricants (EALs) US EPA Vessel General Permit 2013 (VGP)

Characteristic Features

Superior thermo-oxidative and hydrolytic stability
Outstanding frictional performance and anti-wear protection
Special non-foaming additives
Protection against rust and corrosion
Designed to withstand extreme conditions, extra low-temperature properties
Compatible with seal materials, paints, and hoses
Intended for severe service, extremely long change intervals
Readily biodegradable; non-toxic, CO₂ emissions reduction

Areas of application:

Parameters

Base Oil	Synthetic oil
Kin. viscosity at 40 °C	The viscosity of a fluid is a measure of its resistance to gradual deformation by shear stress or tensile stress. 26 cSt
Density at 15 °C	825 kg/m3
Kin. viscosity at 100 °C	8
Viscosity Index	Viscosity Index (VI) is a measure of the change of viscosity with temperature. The higher the VI, the less is the viscosity affected by changes in temperature. 298
Flash Point	>170 °C
Pour Point	The pour point of a liquid is the temperature below which the liquid loses its flow characteristics. < -55 °C